sh
- MTL ICC211 隔离器 DATAshEET
- shSG-054石油化工厂基础工程设计内容规定
- sh3515-2003大型设备吊装工程施工工艺标准
- sh-3504-2000
- shT 0356-1996 燃料油
- sh3538-2005石化设备安装通用规范
- shSG 035 89 施工现场中的设备材料代用导则
- sh T 1541 2006 热塑性塑料颗粒外观试验方法
- BS EN 10292 2007 Continuously hot dip coated strip and sheet of steels with high yield strength for cold forming — Technical delivery conditions
- DIN 6908 1995 组合螺钉用锥形弹性垫圈 Conical spring washers for screw and washer assemblies
- shSG 035 89 施工现场中的设备材料代用导则
- sh T 1541 2006 热塑性塑料颗粒外观试验方法
- BS EN 10292 2007 Continuously hot dip coated strip and sheet of steels with high yield strength for cold forming — Technical delivery conditions
- DIN 6908 1995 组合螺钉用锥形弹性垫圈 Conical spring washers for screw and washer assemblies
- YD/T 1417-2005 接入网设备测试方法 单线对高比特率数字用户线shDSL 2
- YD/T 1417-2005 接入网设备测试方法 单线对高比特率数字用户线shDSL 1
- SJ 50597/14-94 混合微电路详细规范 Hsh91型精密双采样／保持放大器
- SJ 50597/13-94 混合微电路详细规范 I-Ish4860型高速精密采样／保持放大器
- SJ 20269-93 Esh3型测试接收机 检定规程
- shSG 035 89 施工现场中的设备材料代用导则
- sh T 1541 2006 热塑性塑料颗粒外观试验方法
- BS EN 10292 2007 Continuously hot dip coated strip and sheet of steels with high yield strength for cold forming — Technical delivery conditions
- DIN 6908 1995 组合螺钉用锥形弹性垫圈 Conical spring washers for screw and washer assemblies
- shSG 035 89 施工现场中的设备材料代用导则
- sh T 1541 2006 热塑性塑料颗粒外观试验方法
- BS EN 10292 2007 Continuously hot dip coated strip and sheet of steels with high yield strength for cold forming — Technical delivery conditions
- DIN 6908 1995 组合螺钉用锥形弹性垫圈 Conical spring washers for screw and washer assemblies
- BS 6349 6：1989 Maritime structures. Design of inshore moorings and floating structures
- BS EN 10055 1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions
- sh 0164 1992 1998 石油产品包装、贮运及交货验收规则
- JIS B1251 2001 锥形弹簧垫圈 Spring lock washers
- sh T 3150 2007 石油化工搅拌器工程技术规定
- sh T 3151 2007 石油化工转子泵工程技术规定
- sh T 3416 2005 石油化工用套管结晶器
- sh Q1 1999 加油站建设规定
- shQ 002 2001 《汽车加油加气站设计规范》车用乙醇汽油补充规定
- shQ 003 2001 《石油库设计规范》车用乙醇汽油调合设施补充规定
- UL 514C 1996 2007 Nonmetallic Outlet Boxes Flush Device Boxes and Covers
- EN 10249 1：1995 Cold formed sheet piling of non alloy steels. Technical delivery conditions
- EN 10249 2:1995 Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions